Reference: reconciliation properties and values - BlueCat Address Manager - 9.1.0

Address Manager API Guide

prodname
BlueCat Address Manager
version_custom
9.1.0

discoveryType A type of discovery method to use for the network discovery operation. This must be one of the constants listed in IP discovery type.
seedRouterAddress IPv4 address. This is not the default gateway address.
snmpVersion Constants defined in SNMP Version. This must be one of the constants listed in SNMP version.
snmpPortNumber An integer greater than 0.
snmpCommunityString Comma-separated strings. For example, community10,community12,community13.
securityLevel This must be one of the constants listed in SNMP security levels.
context A string (required only when snmpVersion is v3).
authenticationType Constants defined in SNMP Authentication Type. This must be one of the constants listed in SNMP authentication Type (required only when securityLevel is AUTH_NOPRIV or AUTH_PRIV).
authPassphrase A string (required only when securityLevel is AUTH_NOPRIV or AUTH_PRIV).
privacyType A string containing the privacy encryption types. This must be one of the constants listed in SNMP privacy type (required only when securityLevel is AUTH_PRIV).
privacyPassphrase A string containing the privacy authentication password (required only when securityLevel is AUTH_PRIV).
networkBoundaries Comma-separated IPv4 ranges. For example, 10.0/8,13.0.0.1-13.0.0.126.
Note: CIDR and IPv4 range formats are unsupported.
blackHoleVlan VLAN ID for the black hole VLAN. This is used as a default VLAN for all unused ports.
trunkDefaultVlan Unused VLAN ID to be assigned to a trunk as a native/default VLAN to protect controlled traffic from being spoofed.
skipFqdn True or false. This is used to determine whether Address Manager discovery engine to perform FQDN resolution and DNS lookups against any DNS server.
dnsServers One or more IPv4 or IPv6 addresses (comma-separated). This is used to perform FQDN and DNS reverse lookups.
enableLayer2Discovery True or false.
schedule Schedule settings:
  • Format: hh:mma,dd MMM yyyy, frequencyType
  • frequency: frequencyPeriod
  • frequencyType: EVERY or ONCE
  • frequency: an integer greater than 0
  • frequencyPeriod: constant defined in TimeUnits which includes [MINUTES|HOURS|DAYS]
For example, 03:37am,31 May 2011,EVERY,6,Days
activeStatus True or false.
acceptanceCriteriaReclaim Used to enable automated acceptance. acceptanceCriteriaReclaim, acceptanceCriteriaUnknown, acceptanceCriteriaMismatch and view should be used together as a complete configuration.
  • Format: timeValue, timeUnit, actionType
  • timeValue: a integer greater than 0
  • timeUnit: constant defined in timeUnits which includes [MINUTES|HOURS|DAYS]
  • actionType: constant defined in AcceptanceActionType which includes [RECONCILE, NOACTION]
For example, 10,MINUTES,RECONCILE
acceptanceCriteriaUnknown Used to enable automated acceptance.
  • Format: timeValue, timeUnit, actionType
  • timeValue: a integer greater than 0
  • timeUnit: constant defined in timeUnits which includes [MINUTES|HOURS|DAYS]
  • actionType: constant defined in AcceptanceActionType which includes [RECONCILE, NOACTION]
For example, 20,HOURS,NOACTION
acceptanceCriteriaMismatch Used to enable automated acceptance.
  • Format: timeValue, timeUnit,actionType
  • timeValue: a integer greater than 0
  • timeUnit: constant defined in timeUnits which includes [MINUTES|HOURS|DAYS]
  • actionType: constant defined in AcceptanceActionType which includes [RECONCILE, NOACTION]
For example, 30,MINUTES,RECONCILE
view Use if you want to enable the automated acceptance for an existing view’s name.
overrideList Comma-separated IPv4 ranges. For example, 10/16,172/16,172.25.0.2-172.25.0.18.
Note: CIDR and IP4 range formats are supported.