Adding a VLAN interface from the user interface - BlueCat Integrity - 26.1.0

Add or edit VLAN interfaces to managed DNS/DHCP Servers from the Address Manager user interface. BlueCat recommends this method for most scenarios, including upgrades and new installations of DNS/DHCP Server

1. Select the Servers tab in the sidebar, then select Servers.
2. Select the name of a server.
3. Select the Services tab.
4. Under Server management and configuration, locate the Interfaces service panel and select Edit service.
5. Select an interface tab, such as eth0.
6. Under VLANs, enter a VLAN ID between 1 and 4096.
7. Select Add VLAN.
8. In the Description field, enter a name for the VLAN interface. You can enter up to 80 alphanumeric characters including spaces, but excluding special characters.
9. In the Address and Prefix length fields, enter an IPv4 or IPv6 address and prefix length. For example, Address: 192.0.2.100 and Prefix length: 24 or Address: 2001:db8::AC10:FE02 Prefix length: 64. This will be the IP address assigned to the newly created VLAN interface.
10. Select the Add (+) button.
11. Select Save.