Lists the Address Manager-specific SNMP polled objects.
The following table lists the Address Manager-specific SNMP polled objects in the file BAM-SNMP-MIB.txt.
Each Address Manager MIB OID (object identifier) begins with the following prefix:
.1.3.6.1.4.1.13315 (iso.org.dod.internet.private.enterprise.bluecatnetworks)All Address Manager object IDs begin with the same prefix, but it's omitted from the OID column below.
Attention: The following SNMP objects have been deprecated and are no longer in
use:
- .walFilesTotalSize (.100.210.1.8.1.0)
- .replicationWarningThreshold (.100.210.1.8.4.0)
- .replicationBreakThreshold (.10.210.1.8.5.0)
| SNMP Object | OID | Access | Description |
|---|---|---|---|
| .app | .100.210.1 | Address Manager application objects container | |
| .common | .100.210.1.1 | Address Manager common application objects container | |
| .version | .100.210.1.1.1.0 | Read-only | Version of Address Manager |
| .startTime | .100.210.1.1.2.0 | Read-only | Address Manager application start-up date and time |
| .notificationMessage | .100.210.1.1.3.0 | Read-only | Trap-specific notification message |
| .database | .100.210.1.2 | Address Manager database objects container | |
| .maxPoolSize | .100.210.1.2.1.0 | Read-only | Maximum number of database connections maintained at any given time |
| .numConnections | .100.210.1.2.2.0 | Read-only | Number of database connections currently in use |
| .deployer | .100.210.1.3 | Address Manager deployer objects container | |
| .serverCountInQueue | .100.210.1.3.1.0 | Read-only | Number of servers that have deployments currently queued |
| .executingServerCount | .100.210.1.3.2.0 | Read-only | Number of servers that have active deployments |
| .numberOfTasks | .100.210.1.3.3.0 | Read-only | Number of deployer tasks |
| .eventNotification | .100.210.1.4 | Address Manager event notification objects container | |
| .queueCount | .100.210.1.4.1.0 | Read-only | Number of event notifications currently queued |
| .reconciliation | .100.210.1.5 | Address Manager reconciliation objects container | |
| .poolSize | .100.210.1.5.1.0 | Read-only | Pool size of the reconciliation service |
| .scheduledDeployer | .100.210.1.6 | Address Manager scheduled deployer objects container | |
| .numOfTimers | .100.210.1.6.1.0 | Read-only | Total number of defined scheduled deployment tasks |
| .running | .100.210.1.6.2.0 | Read-only | Defines whether the deployment scheduler is running |
| .scheduledTaskService | .100.210.1.7 | Address Manager scheduled task service objects container | |
| .queueSize | .100.210.1.7.1.0 | Read-only | Number of currently scheduled report tasks |
| .replication | .100.210.1.8 | Address Manager replication objects container | |
| .walFilesTotalSize | .100.210.1.8.1.0 | Read-only |
Attention: This OID has been deprecated. The following value is returned
by this OID:
No Such Instance currently exists at this OID |
| .replicationNodeStatus | .100.210.1.8.2.0 | Read-only | The replication status of the server. The status values are as follows:
|
| .replicationAverageLatency | .100.210.1.8.3.0 | Read-only | Average WAL record synchronization latency between the Primary and Standby
server (in seconds). When the Address Manager server is a Standby or
Standalone server, the value returned is 0. When database replication isn't
running, the value returned is -1. For more information on database replication latency, refer to Monitoring database replication latency. |
| .replicationWarningThreshold | .100.210.1.8.4.0 | Read-only |
Attention: This OID has been deprecated and replaced by the
.replicationLatency WarningThreshold OID. The following value is returned by this
OID:
No Such Instance currently exists at this OID |
| .replicationBreakThreshold | .100.210.1.8.5.0 | Read-only |
Attention: This OID has been deprecated and replaced by the
.replicationLatency CriticalThreshold OID. The following value is returned by this
OID:
No Such Instance currently exists at this OID |
| .replicationLatencyWarningThreshold | .100.210.1.8.6.0 | Read-only | Warning threshold of the replication stream (in seconds), available only from
the Primary server when database replication is configured. When the Address Manager server is a Standby, Removed Standby, or Standalone server,
the following value is returned by this OID: No Such Instance currently
exists at this OID |
| .replicationLatencyCriticalThreshold | .100.210.1.8.7.0 | Read-only | Critical threshold of the replication stream (in seconds), available only from
the Primary server when database replication is configured. When the Address Manager server is a Standby, Removed Standby, or Standalone server,
the following value is returned by this OID: No Such Instance currently
exists at this OID |
| .replicationStatusTable | .100.210.1.8.8 | Information about servers in replication. The object returns a table that contains a list of Standby servers with their associated hostname, IPv4 address, the current latency (in seconds), the replication health, and the replication role. | |
| .replicationStatusEntry | .100.210.1.8.8.1 | Not-accessible | Information about replicating servers entry container. |
| .hostname | .100.210.1.8.8.1.1 | Read-only | Hostname of the servers in replication. |
| .ipv4Address | .100.210.1.8.8.1.2 | Not-accessible | IPv4 address of the servers in replication. |
| .currentLatency | .100.210.1.8.8.1.3 | Read-only | Current latency (in seconds) of the Standby servers in replication. If the value is -1, the replication latency is pending. |
| .replicationHealth | .100.210.1.8.8.1.4 | Read-only | Streaming replication health of the Standby servers. The values are as
follows:
Note: The Initializing state indicates that the database of the server
is initializing.
|
| .replicationRole | .100.210.1.8.8.1.5 | Read-only | Role of the server in replication. The roles are as follows:
|
| .notification | .100.210.1.9 | Address Manager notification objects container | |
| .messagesReceived | .100.210.1.9.1.0 | Read-only | Number of notification messages received |
| .messagesAccepted | .100.210.1.9.2.0 | Read-only | Number of notification messages accepted |
| .ackSent | .100.210.1.9.3.0 | Read-only | Number of notification messages acknowledged |
| .messagesProcessed | .100.210.1.9.4.0 | Read-only | Number of notification messages processed |
| .backlogSize | .100.210.1.9.5 | Notification backlog size container | |
| .NotificationDistributionTable | .100.210.1.9.5.1 | Information about the notification backlog size. The objects returns a table that contains notifications in the backlog including the count, the IP address of the source DNS/DHCP Server, the type of notification, the category of the notification, and the state of the notification. | |
| .distributionTableEntry | .100.210.1.9.5.1.1 | Not-accessible | Information about notification entry container Attention: The SNMP
service must be configured to use SNMP version v2c or v3 to receive information
from this OID.
|
| .count | .100.210.1.9.5.1.1.1 | Read-only | Number of notifications Attention: The SNMP service must be
configured to use SNMP version v2c or v3 to receive information from this
OID.
|
| .bddsServerID | .100.210.1.9.5.1.1.2 | Not-accessible | Server ID of the source DNS/DHCP Server Attention: The SNMP
service must be configured to use SNMP version v2c or v3 to receive information
from this OID.
|
| .serviceType | .100.210.1.9.5.1.1.3 | Not-accessible | Type of notification. The type can be one of the following:
Attention: The SNMP service must be configured to use SNMP version
v2c or v3 to receive information from this OID.
|
| .serviceAction | .100.210.1.9.5.1.1.4 | Not-accessible | Category of the notification type. The category can be the following based on
the notification type: DNS
DHCP
Attention: The SNMP service must be configured to use SNMP
version v2c or v3 to receive information from this OID.
|
| .state | .100.210.1.9.5.1.1.5 | Not-accessible | State of the notification. The state can be one of the following:
Attention: The SNMP service must be configured to use SNMP version
v2c or v3 to receive information from this OID.
|
| .fileSystemFootprint | .100.210.1.9.5.2.0 | Read-only | Total size of the notification backlog (in kilobytes) Attention: The
SNMP service must be configured to use SNMP version v2c or v3 to receive
information from this OID.
|
| .notificationServiceStartTime | .100.210.1.9.6.0 | Read-only | Start time of the notification service Attention: The SNMP service
must be configured to use SNMP version v2c or v3 to receive information from this
OID.
|
| .dbBackup | .100.210.1.10 | Address Manager database backup object container | |
| .lastSuccessfulBackupTime | .100.210.1.10.1.0 | Read-only | Date and time of the last successful local database backup |
| .lastSuccessfulRemoteBackupTime | .100.210.1.10.2.0 | Read-only | Date and time of the last successful remote database backup |
| .JVM | .100.210.3 | JVM objects container | |
| .freeMemory | .100.210.3.1.0 | Read-only | Total amount of free memory in the Java Virtual Machine (in kilobytes) |
| .maxMemory | .100.210.3.2.0 | Read-only | Maximum amount of free memory in the Java Virtual Machine (in kilobytes) |
| .gcTime | .100.210.3.3.0 | Read-only | Time taken to complete the last garbage collection operation (in seconds) |
| .usageThresholdExceeded | .100.210.3.4.0 | Read-only | Defines whether the Java Virtual Machine virtual memory limit has been exceeded |
| .activeThreadCount | .100.210.3.5.0 | Read-only | Number of currently active Java threads |
| .traps | .100.210.255 | Address Manager trap objects container | |
| .bamMsgTrap | .100.210.255.1.0 | Generic trap sent from Address Manager |