Note: The ports must be opened on the firewall
for access to the Address Manager services listed.
If the service is not required or in use, it can be
blocked.
Address Manager listener ports:
Port Number | Protocol | Use |
---|---|---|
22 | TCP | SSH/SCP connectivity to servers/SSH2 (secure shell) |
80 | TCP | Management port for Address Manager access (HTTP) |
88 | TCP/UDP | Kerberos/Active Directory Authentication/GSS-TSIG |
123 | UDP | Network Time Protocol (NTP) |
161 | UDP | SNMP management |
443 | TCP | Secure management port used for Address Manager access (HTTPS) |
873 | TCP/UDP | Address Manager replication (rsync) |
1099 | TCP | Address Manager replication / JMX service |
5432 | TCP | Address Manager replication |
10045* | TCP/UDP | Address Manager and DNS/DHCP Server notification |
Address Manager ports used as a client:
Port Number | Protocol | Use |
---|---|---|
21 | TCP | FTP |
22 | TCP/UDP | Secure backup configured to save to a remote server (SFTP) |
22 | TCP | SSH/SCP connectivity to servers / SSH2 (secure shell) |
25 | TCP/UDP | Email notification (SMTP) |
49 | TCP | TACACS+ authentication |
53 | TCP/UDP | DNS, Discovery, Response Policy Search |
88 | TCP/UDP | Kerberos/Active Directory Authentication/GSS-TSIG |
123 | UDP | Network Time Protocol (NTP) |
162*** | UDP | SNMP Traps |
389** | TCP/UDP | LDAP authentication |
514 | UDP | syslog redirection from Address Manager |
636 | TCP | SSL support (LDAP) |
873 | TCP/UDP | Address Manager replication (rsync) |
1099 | TCP | Address Manager replication |
1812*** | TCP/UDP | RADIUS authentication |
3269 | TCP | LDAPS for global catalog (GC) |
5432 | TCP | Reporting, Disaster Recovery, database replication |
10042* | TCP | Secure management and connectivity to DNS/DHCP Servers and Address Manager Management Agent for Windows |
Note: Port notices
- * The following ports are required for communication to DNS/DHCP Server or DDW Server
- ** These are the standard ports used for the specified protocol however, you can specify different ports.
- *** These are the default ports however, you can change to use different ports.
- When using HTTP, port 80 is required and port 443 is optional. When using HTTPS, port 443 is required and port 80 is optional.
- Port 10045 on all Address Manager servers in replication, including the Primary server, must be open for incoming connections. In addition, you must ensure to enable Internet Control Message Protocol (ICMP) to allow the Primary Address Manager server to reach the Secondary and Tertiary server.
- When configuring or running database replication, ports 22, 873, 1099, and 5432 must be open on the firewall between the affected Address Manager servers.
- Additional ports might need to be opened for iDRAC usage. For more information, refer to the Dell iDRAC User Guide.