Changing the state of IP addresses - BlueCat Integrity - 9.3.0

Address Manager Administration Guide

Product name
BlueCat Integrity

You can change the status (DHCP reserved, static and reserved) of one or more IP addresses at the same time.

The following IP address state changes are permitted:

From/To Static Reserved DHCP Reserved DHCP Allocated
Static N/A Yes - only when no host name assigned Yes No
Reserved Yes N/A Yes No
DHCP Reserved Yes Yes - only when no host name assigned N/A No
DHCP Allocated No No Yes N/A
  • MAC addresses are mandatory when selecting DHCP reserved. Each MAC address must be unique and not in use by any other IP address within the same network.
  • You are only permitted to change the status of multiple IP addresses if your workflow change request permission isn't set to Recommended as described in Workflow change requests. If your workflow permission is set to recommended, you can only change one IP address per transaction.
  • If you are attempting to change the state of an IP address which is part of a pending workflow transaction, you won't be permitted to change the state until the pending transaction is complete.
  • If you attempt to change the status of an IP address to reserved and the IP address has a host name associated with it, you won't be able to change the state of the IP address. It will be moved to the omitted list, per the address type definitions in Address types.
Important: If your network contains fewer than 4 addresses (that is, /31 or /32 networks), you can't change the IP address state to DHCP Reserved. In the Change IP State page, DHCP Reserved is unavailable.

To change the state of IP addresses:

  1. Select the IP Space tab. Tabs remember the page you last worked on, so select the tab again to ensure you're on the Configuration information page.
  2. From the configuration drop-down menu, select a configuration.
  3. Select a network and IPv4 block to list the IP ranges.
  4. Select the check box for one or more addresses in the list.
  5. Click Action, and then select Change IP state.
  6. Under General, select an option from the IP State drop-down menu. Additional fields appear for each of the allocation types. For more information, refer to IP address allocation types.
    Note: The Applicable Addresses section will display only those IP addresses which are allowed to change to state that you have selected in the General section. Any IP addresses that don't meet criteria for allowable state changes are listed in the Omitted Addresses section.
  7. Under Change Control, add comments, if required.
  8. Click Update.