Address Manager must join the HSM security world in order to perform
zone signing.
Joining Address Manager to the security world consists of two parts:
configuring the security world, then joining Address Manager to the
security world.
To configure the security world:
-
Select the Settings tab in the sidebar, then select
HSM settings.
-
Select the HSM configuration name menu, then select View
details.
-
In the expanded details section, select Configure security
world.
-
Under Configure mode, select one of the following
configuration methods:
- Use RFS—select if you will configure the security world using
a Remote File System. If selected, the RFS address and RFS
port fields are displayed.
- RFS address—enter the IPv4 address of the Remote File
System.
- RFS port—enter the port number of the RFS (by default,
9004).
- Upload security world file—select to configure the security
world using security world files in a compressed folder on your local
workstation.
Note: The security world
files must be copied to your local workstation from the RFS. If you won't be using
the RFS to configure the security world, uploading the security world files is
mandatory. For details, refer to
OPTIONAL: Copying Security World files.
-
In the Change control
section, add comments if required.
-
Select Configure.
Once configured, the Security world configuration section in the
expanded details section displays details of your mode of configuration.
Next, you must join Address Manager to the security world.