DNS/DHCP Server Polled Objects - BlueCat Address Manager - 9.1.0

Address Manager Administration Guide

prodname
BlueCat Address Manager
version_custom
9.1.0

Lists the DNS/DHCP Server-specific SNMP polled-objects.

The following table lists the DNS/DHCP Server-specific SNMP polled-objects in the files BCN-DHCPV4-MIB.mib, BCN-DNS-MIB.mib, BCN-TFTP-MIB.mib, BCN-NTP-MIB.mib, BCN-COMMANDSERVER-MIB.mib, BCN-SYSTEM-MIB.mib, and BCN-HA-MIB.mib.

Each DNS/DHCP Server MIB OID (object identifier) begins with the following prefix:

.1.3.6.1.4.1.13315 (iso.org.dod.internet.private.enterprise.bluecatnetworks)

All DNS/DHCP Server object IDs begin with the same prefix, but it is omitted from the OID column below.

BCN-DHCPV4-MIB.mib:

SNMP Object OID Access Description
.bcnDhcpv4SerOperState .3.1.1.2.1.1 Read-only Current running state of the service:
  • 1—Running
  • 2—Not running
  • 3—Starting
  • 4—Stopping
  • 5—Fault
.bcnDhcpv4FirstAlertIpAddr .3.1.1.2.1.2 Read-only Returns the IP address identifying either subnet or pool for which the available IPs have been exhausted
.bcnDhcpv4LeaseStatesSuccess .3.1.1.2.1.3 Read-only Number of successful DHCP leases issued per second
.bcnDhcpv4LeaseTable .3.1.1.2.2.1 Not-accessible Current lease table
.bcnDhcpv4LeaseEntry .3.1.1.2.2.1.1 Not-accessible Information about a particular DHCP lease
.bcnDhcpv4LeaseIP .3.1.1.2.2.1.1.1 Not-accessible IP address of the lease
.bcnDhcpv4LeaseStartTime .3.1.1.2.2.1.1.2 Read-only Start time of the lease
.bcnDhcpv4LeaseEndTime .3.1.1.2.2.1.1.3 Read-only End time of the lease
.bcnDhcpv4LeaseTimeStamp .3.1.1.2.2.1.1.4 Read-only Timestamp for the lease
.bcnDhcpv4LeaseMacAddress .3.1.1.2.2.1.1.5 Read-only The Hardware address (MAC address) of the lease
.bcnDhcpv4LeaseHostname .3.1.1.2.2.1.1.6 Read-only The client hostname of the lease
.bcnDhcpv4SubnetTable .3.1.1.2.2.2 Not-accessible Current subnet table
.bcnDhcpv4SubnetEntry .3.1.1.2.2.2.1 Not-accessible Information about a particular DHCP subnet
.bcnDhcpv4SubnetIP .3.1.1.2.2.2.1.1 Not-accessible IP address of the subnet
.bcnDhcpv4SubnetMask .3.1.1.2.2.2.1.2 Read-only IP mask of the subnet
.bcnDhcpv4SubnetSize .3.1.1.2.2.2.1.3 Read-only Size of the subnet
.bcnDhcpv4SubnetFreeAddresses .3.1.1.2.2.2.1.4 Read-only Number of IP addresses available in the subnet
.bcnDhcpv4SubnetLowThreshold .3.1.1.2.2.2.1.5 Read-only Low threshold for available free addresses in the subnet
.bcnDhcpv4SubnetHighThreshold .3.1.1.2.2.2.1.6 Read-only High threshold for available free addresses in the subnet
.bcnDhcpv4PoolTable .3.1.1.2.2.3 Not-accessible Current pool table
.bcnDhcpv4PoolEntry .3.1.1.2.2.3.1 Not-accessible Information about a particular DHCP pool
.bcnDhcpv4PoolStartIP .3.1.1.2.2.3.1.1 Not-accessible Start IP address in the pool
.bcnDhcpv4PoolEndIP .3.1.1.2.2.3.1.2 Read-only End IP address in the pool
.bcnDhcpv4PoolSubnetIP .3.1.1.2.2.3.1.3 Read-only Subnet IP address of the pool
.bcnDhcpv4PoolSize .3.1.1.2.2.3.1.4 Read-only The size of the pool
.bcnDhcpv4PoolFreeAddresses .3.1.1.2.2.3.1.5 Read-only The number of IP addresses available in the pool
.bcnDhcpv4FixedIPTable .3.1.1.2.2.4 Not-accessible Current DHCP subnet tables in configuration
.bcnDhcpv4FixedIPEntry .3.1.1.2.2.4.1 Not-accessible Information about a particular DHCP subnet
.bcnDhcpv4FixedIP .3.1.1.2.2.4.1.1 Read-only One of the current fixed IP addresses in the DHCPv4 configuration
.bcnDhcpv4AlarmSeverity .3.1.1.3.1.1 Accessible-for-notify Severity classification for the alarm
.bcnDhcpv4AlarmInfo .3.1.1.3.1.2 Accessible-for-notify Descriptive information about the alarm event
.bcnDhcpv4FailOverState .3.1.1.3.1.3 Accessible-for-notify Current state of the DHCP failover:
  • 1—Startup
  • 2—Normal
  • 3—Communications interrupted
  • 4—Partner down
  • 5—Potential conflict
  • 6—Recover
  • 7—Paused
  • 8—Shutdown
  • 9—Recover done
  • 254—Recover wait
.bcnDhcpv4SubnetAlertIpAddr .3.1.1.3.1.4 Accessible-for-notify Returns the IP address identifying a subnet for which the available IPs have been exhausted

BCN-DNS-MIB.mib:

SNMP Object OID Access Description
.bcnDnsSerOperState .3.1.2.2.1.1 Read-only Current running state of the service:
  • 1—Running
  • 2—Not running
  • 3—Starting
  • 4—Stopping
  • 5—Fault
.bcnDnsSerNumberOfZones .3.1.2.2.1.2 Read-only Number of zones loaded
.bcnDnsSerTransfersRunning .3.1.2.2.1.3 Read-only Number of zone transfers currently in progress
.bcnDnsSerTransfersDeferred .3.1.2.2.1.4 Read-only Number of zone transfers currently deferred
.bcnDnsSerSOAQueriesInProgress .3.1.2.2.1.5 Read-only Number of SOA queries in progress
.bcnDnsSerQueryLogging .3.1.2.2.1.6 Read-only State of query logging:
  • 1—On
  • 2—Off
.bcnDnsSerDebugLevel .3.1.2.2.1.7 Read-only Debug log level. Ranges from 0 to 99:
  • 0—No logging
  • 99—Maximum level of logging
.bcnDnsStatSrvQrySuccess .3.1.2.2.2.1.1 Read-only Queries resulted in a successful answer
.bcnDnsStatSrvQryReferral .3.1.2.2.2.1.2 Read-only Queries resulted in referral answer
.bcnDnsStatSrvQryNXRRSet .3.1.2.2.2.1.3 Read-only Queries resulted in non-existent record responses with no data
.bcnDnsStatSrvQryNXDomain .3.1.2.2.2.1.4 Read-only Queries resulted in non-existent domain responses with no data
.bcnDnsStatSrvQryRecursion .3.1.2.2.2.1.5 Read-only Queries which caused the server to perform recursion lookups to find the final answer
.bcnDnsStatSrvQryFailure .3.1.2.2.2.1.6 Read-only Number of failed queries that did not result in non-existent domain or record
.bcnDnsStatSrvQryFORMERR .3.1.2.2.2.1.7 Read-only Number of queries that returned FORMERR
.bcnDnsStatSrvQrySERVFAIL .3.1.2.2.2.1.8 Read-only Number of queries that returned SERVFAIL
.bcnDnsStatSrvQryDuplicate .3.1.2.2.2.1.9 Read-only Number of queries that were being processed with an existing IP address, port, query ID, name, type, and class
.bcnDnsStatSrvQryDropped .3.1.2.2.2.1.10 Read-only Number of queries that were dropped due to the excessive processing of queries with an existing IP address, port, query ID, name, type, and class
.bcnDnsStatSrvQryAuthAns .3.1.2.2.2.1.11 Read-only Number of queries that returned an authoritative answer
.bcnDnsStatSrvQryNoauthAns .3.1.2.2.2.1.12 Read-only Number of queries that returned a non authoritative answer
.bcnDnsStatAllViewQryRTT10 .3.1.2.2.2.2.1 Read-only Number of queries whose round trip times are between 0 (inclusively) and 10 (exclusively) milliseconds
.bcnDnsStatAllViewQryRTT100 .3.1.2.2.2.2.2 Read-only Number of queries whose round trip times are between 10 (inclusively) and 100 (exclusively) milliseconds
.bcnDnsStatAllViewQryRTT500 .3.1.2.2.2.2.3 Read-only Number of queries whose round trip times are between 100 (inclusively) and 500 (exclusively) milliseconds
.bcnDnsStatAllViewQryRTT800 .3.1.2.2.2.2.4 Read-only Number of queries whose round trip times are between 500 (inclusively) and 800 (exclusively) milliseconds
.bcnDnsStatAllViewQryRTT1600 .3.1.2.2.2.2.5 Read-only Number of queries whose round trip times are between 800 (inclusively) and 1600 (exclusively)
.bcnDnsStatAllViewQryRTT1600Plus .3.1.2.2.2.2.6 Read-only Number of queries whose round trip times are 1600 milliseconds (inclusively) or greater

BCN-TFTP-MIB.mib:

SNMP Object OID Access Description
.bcnTftpSerOperState .3.1.3.2.1.1 Read-only Current running state of the service:
  • 1—Running
  • 2—Not running
  • 3—Starting
  • 4—Stopping
  • 5—Fault
.bcnTftpSerDirs .3.1.3.2.2.1 Read-only Number of directories on the TFTP sub-tree
.bcnTftpSerFiles .3.1.3.2.2.2 Read-only Number of files on the TFTP sub-tree
.bcnTftpSerFilesSize .3.1.3.2.2.3 Read-only The sum of the size of all files in kilobytes
.bcnTftpSerPartialList .3.1.3.2.2.4 Read-only The TFTP information is partial

BCN-NTP-MIB.mib:

SNMP Object OID Access Description
.bcnNtpSerOperState .3.1.4.2.1.1 Read-only Current running state of the service:
  • 1—Running
  • 2—Not running
  • 3—Starting
  • 4—Stopping
  • 5—Fault
.bcnNtpSysLeap .3.1.4.2.2.1 Read-only Two-bit warning of an impending leap second to be inserted in the NTP timescale
.bcnNtpSysStratum .3.1.4.2.2.2 Read-only Indicating the stratum of the local clock:
  • 0—Unspecified
  • 1—Primary reference
  • 2 to 255—Secondary reference
.bcnNtpSysPrecision .3.1.4.2.2.3 Read-only Signed integer indicating the precision of the various clocks, in seconds to the nearest power of two
.bcnNtpSysRootDelay .3.1.4.2.2.4 Read-only The total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.
.bcnNtpSysRootDispersion .3.1.4.2.2.5 Read-only The maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds
.bcnNtpSysRefld .3.1.4.2.2.6 Read-only The particular reference clock
.bcnNtpSysRefTime .3.1.4.2.2.7 Read-only The local time when the local clock was last updated
.bcnNtpSysPoll .3.1.4.2.2.8 Read-only The minimum interval between transmitted messages, in seconds as a power of two
.bcnNtpSysPeer .3.1.4.2.2.9 Read-only The current synchronization source
.bcnNtpSysFreq .3.1.4.2.2.10 Read-only The clock frequency offset
.bcnNtpSysclock .3.1.4.2.2.11 Read-only The current local time
.bcnNtpSysSystem .3.1.4.2.2.12 Read-only The type of the local operating system
.bcnNtpSysProcessor .3.1.4.2.2.13 Read-only The type of the local processor
.bcnNtpSysJitter .3.1.4.2.2.14 Read-only Indicates how much the individual pulses vary from second to second
.bcnNtpPeersVarTable .3.1.4.2.3.1 Not-accessible A table listing the peers known to the server as well as summary information of their state
.bcnNtpPeersVarEntry .3.1.4.2.3.1.1 Not-accessible A logical row in the bcnNtpPeersVarTable
.bcnNtpPeersAssocId .3.1.4.2.3.1.1.1 Not-accessible Assocation ID of the peer
.bcnNtpPeersConfigured .3.1.4.2.3.1.1.2 Read-only A bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable
.bcnNtpPeersPeerAddressType .3.1.4.2.3.1.1.3 Read-only The internet address type of the peer
.bcnNtpPeersPeerAddress .3.1.4.2.3.1.1.4 Read-only The internet address of the peer
.bcnNtpPeersPeerPort .3.1.4.2.3.1.1.5 Read-only 16-bit port number of the peer
.bcnNtpPeersHostAddressType .3.1.4.2.3.1.1.6 Read-only The internet address type of the host
.bcnNtpPeersHostAddress .3.1.4.2.3.1.1.7 Read-only The internet address of the host
.bcnNtpPeersHostPort .3.1.4.2.3.1.1.8 Read-only 16-bit port number of the host
.bcnNtpPeersLeap .3.1.4.2.3.1.1.9 Read-only Two-bit code warning of an impending leap second to be inserted in the NTP timescale
.bcnNtpPeersMode .3.1.4.2.3.1.1.10 Read-only The association mode:
  • 0—Unspecified
  • 1—Symmetric active
  • 2—Symmetric passive
  • 3—Client
  • 4—Server
  • 5—Broadcast
  • 6—Reserved for NTP control messages
  • 7—Reserved for private use
.bcnNtpPeersStratum .3.1.4.2.3.1.1.11 Read-only Indicates the stratum of the peer clock:
  • 0—Unspecified
  • 1—Primary reference
  • 2 to 255—Secondary reference
.bcnNtpPeersPeerPoll .3.1.4.2.3.1.1.12 Read-only Poll interval of the peer
.bcnNtpPeersHostPoll .3.1.4.2.3.1.1.13 Read-only Poll interval of the host
.bcnNtpPeersPrecision .3.1.4.2.3.1.1.14 Read-only Signed integer indicating the precision of the various clocks, in seconds to the nearest power of two
.bcnNtpPeersRootDelay .3.1.4.2.3.1.1.15 Read-only The total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds
.bcnNtpPeersRootDispersion .3.1.4.2.3.1.1.16 Read-only The maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds
.bcnNtpPeersRefId .3.1.4.2.3.1.1.17 Read-only The particular reference clock
.bcnNtpPeersRefTime .3.1.4.2.3.1.1.18 Read-only The local time when the local clock was last updated
.bcnNtpPeersOrgTime .3.1.4.2.3.1.1.19 Read-only The local time at the peer when its lastest NTP message was sent
.bcnNtpPeersReceiveTime .3.1.4.2.3.1.1.20 Read-only The local time when the latest NTP message from the peer arrived
.bcnNtpPeersTransmitTime .3.1.4.2.3.1.1.21 Read-only The local time at which the NTP message departed the sender
.bncNtpPeersReach .3.1.4.2.3.1.1.22 Read-only A shift register of NTP.WINDOW bits used to determine the reachability status of the peer
.bcnNtpPeersOffset .3.1.4.2.3.1.1.23 Read-only Filter offset
.bcnNtpPeersDelay .3.1.4.2.3.1.1.24 Read-only Filter delay
.bcnNtpPeersDispersion .3.1.4.2.3.1.1.25 Read-only Filter dispersion
.bcnNtpPeersJitter .3.1.4.2.3.1.1.26 Read-only Indicates how much the individual pulses vary from second to second

BCN-HA-MIB.mib:

SNMP Object OID Access Description
.bcnHaSerOperState .3.1.5.2.1.1 Read-only Current running state of the service:
  • 1—Standalone
  • 2—Active
  • 3—Passive
  • 4—Stopped
  • 5—Stopping
  • 6—BecomingActive
  • 7—BecomingPassive
  • 8—Fault

BCN-COMMANDSERVER-MIB.mib:

SNMP Object OID Access Description
.bcnCommandServerSerOperState .3.1.7.2.1.1 Read-only Current running state of the service:
  • 1—Running
  • 2—Not running
  • 3—Starting
  • 4—Stopping
  • 5—Fault

BCN-SYSTEM-MIB.mib:

SNMP Object OID Access Description
.bcnSysIdProduct .3.2.2.1.1 Read-only OIDs for the object obtained from BCN-PRODUCTS-MIB
.bcnSysIdOSRelease .3.2.2.1.2 Read-only The BlueCat Networks running OS release
.bcnSysIdSerial .3.2.2.1.3 Read-only Serial number usually assigned to a platform
.bcnSysIdServiceTag .3.2.2.1.4 Read-only Manufacturer service tag
Attention: This OID has been deprecated.
.bcnSysIdPlatform .3.2.2.1.5 Read-only Platform identification