Disabling network redundancy when replacing a DNS/DHCP Server - BlueCat Integrity - 9.5.0

Address Manager Administration Guide

Locale
English
Product name
BlueCat Integrity
Version
9.5.0

How to disable network redundancy when replacing a DNS/DHCP Server.

To disable network redundancy when replacing an DNS/DHCP Server:

  1. Log in to the Address Manager user interface as the administrator and select the Servers tab. Tabs remember the page you last worked on, so select the Servers tab again to ensure you are working with the Configuration information page.
  2. Under Servers, click a server name. The Details tab for the server opens.
  3. Click the server name menu and select Disable.
  4. Re-wire your DNS/DHCP Server or servers as needed.
  5. Log in to the DNS/DHCP Server Administration Console as the administrator and run the following commands to first remove the server from Address Manager control, then remove the bonding interface.
    Adonis> configure system
    Adonis:configure:system> set state no-proteus-control
    Adonis:configure:system> exit
    Adonis> configure interfaces
    Adonis:configure:interfaces> remove bond0
    Please confirm the removal of requested interface (Y/y or N/n)? Y
    This operation will disconnect SSH connections
    Removed interface successfully
  6. Return to the Address Manager user interface and disable network redundancy when replacing the server. For details, refer to Replacing a server.