Editing HSM servers - BlueCat Address Manager - 9.1.0

Address Manager Administration Guide
prodname
BlueCat Address Manager
version_custom
9.1.0

Change the name and IP address of the HSM server in your HSM configuration, as well as the name and IP address of the RFS.

Note: If changing the IP address of the HSM server and/or the Remote File Server, ensure to update all connected DNS Servers with the new IP addresses.

To edit an HSM server:

  1. Select the Administration tab. Tabs remember the page you last worked on, so select the tab again to ensure you're on the Administration page.
  2. Under General, click HSM Configurations.
  3. From the HSM configuration information page, click the HSM Servers tab.
  4. Under HSM Servers, click the name of the HSM server you wish to edit.
  5. Click the HSM server menu and select Edit.
  6. Under HSM Server, edit the following:
    • Name—enter a name for the HSM server
    • IP Address—enter the IP address for the HSM server on your network
      Note: If you make an error when entering the IP address, you will receive the prompt, Invalid IP address. Ensure to enter a valid IPv4 address.
    • Port—enter the port number of the HSM server (by default, 9004)
  7. Under Change Control, add comments, if required.
  8. Click Update.
Address Manager returns you to the HSM configuration information page.