Log in to the BAM user interface as the administrator to enable SNMP service on a BDDS.
To enable and configure SNMP on a BDDS:
- From the configuration drop-down menu, select a configuration.
- Select the Servers tab. Tabs remember the page you last worked on, so select the tab again to ensure you're on the Configuration information page.
- Under Servers, click the name of a BDDS. The Details tab for the server opens.
- Click the server name menu and select Service Configuration.
- From the Service Type drop-down menu, select Simple Network Management Protocol (SNMP). Address Manager queries the server and returns the current values for the service settings.
- Under General Settings, select the Enable SNMP Service check box. When SNMP service is enabled, network management systems may poll the server to receive SNMP information. Deselect this check box to disable SNMP service.
-
Configure the following SNMP Service parameters:
- System Name—enter the system name to be reported through SNMP (by default, Bluecat).
- System Location—enter a description of the system’s location to be reported through SNMP.
- System Contact—enter an e-mail address for the system contact to be reported through SNMP.
- System Description—enter a brief description of the system to be reported through SNMP.
- Polling Period—specify the SNMP polling period in seconds. This value determines the frequency with which the SNMP daemon polls the DHCP service for updates to DHCP lease information.
- Log Level—specify the verbosity of SNMP Syslog logging.
- SNMP Version v1—select the check box to enable
SNMP v1 protocol. When selecting v1, the following additional parameter
appears:
- Community String—type the SNMP community string. This string is used to authenticate the polling request.
- SNMP Version v2c—select the check box to enable
SNMP v2c protocol. When selecting v2c, the following additional
parameter appears:
- Community String—type the SNMP community string. This string is used to authenticate the polling request.
- SNMP Version v3—select the check box to enable
SNMP v3 protocol. When selecting v3, the following additional parameters
appear:
- Security Level—this field appears only
when using SNMP version 3. Select an SNMP security level from the
list:
Option Description No Auth, No Priv No Authentication, No Privacy. The SNMP service doesn't require user authentication and doesn't encrypt the data it returns. Auth, No Priv Authentication, No Privacy. The SNMP service requires user authentication but doesn't encrypt the data it returns. Auth, Priv Authentication, Privacy. The SNMP service requires user authentication and encrypts the data it returns. - Username—this field appears only when using SNMP version 3. Type the SNMP username.
- Authentication Type—select the type of authentication to use with SNMP version 3. This field appears only when using SNMP version 3 and when Auth, No Priv or Auth, Priv is selected in the Security Level field.
- Auth Passphrase—type the user authentication password of the SNMP user. This field appears only when using SNMP version 3 and when Auth, No Priv or Auth, Priv is selected in the Security Level field.
- Privacy Type—select either DES or AES 128 encryption types. This drop-down menu appears only when using SNMP version 3 and when Auth, Priv is selected in the Security Level field.
- Privacy Passphrase—enter the privacy authentication password used to encrypt the trap data. This field appears only when using SNMP version 3 and when Auth, Priv is selected in the Security Level field.
- Security Level—this field appears only
when using SNMP version 3. Select an SNMP security level from the
list:
- Click Update.
To enable and configure SNMP Trap Service, refer to Enabling SNMP Trap Service on DNS/DHCP Servers.