For RADIUS and RSA SecurID authenticators, set the following
values:
| Field | Description |
|---|---|
| Name | Enter a name for the authenticator. |
| Hostname | The Fully Qualified Domain Name or IP address for the authenticator. Attention: The Host field cannot contain underscore
( _ ) characters. If the FQDN of the host contains underscore
characters, you must either enter the IP address of the host or modify the FQDN
so that it does not contain underscore characters and enter the updated FQDN
without underscore characters.
|
| Radius method | Select Password Authentication Protocol (PAP) or Challenge Handshake Authentication Protocol (CHAP). |
| Shared secret | Enter the shared secret used to encrypt and decrypt packets between the client and the server. |
| Port | Enter the port number used for authenticating users against the RADIUS server. The default setting is 1812. |
| Timeout | Specify a value to override the timeout setting used for authentication
requests sent to the RADIUS sever. The default value is 6 seconds. The minimum value is 1 second and the maximum value is 2000000 seconds. |
| Unit | The unit to use with the timeout value - either seconds, minutes, hours, or days. |
| Retries | Specify the number of times Address Manager attempts to retransmit a failed
authentication request to the RADIUS server. The default value is 1 attempt. |