The IPv4 reconciliation management page lists information about IP addresses discovered by an IPv4 reconciliation policy.
The Reconciliations tab of the IPv4 reconciliation
management page () lists discovered IP addresses. Select a row containing an IP address to expand
the additional details section. Information about each discovered IP address is provided through
the following fields.
- Address—the IP address discovered by the IP reconciliation policy.
- Reconciliation type—the type of IP address discovered by
the IP reconciliation policy.
- Mismatch—an address that exists in both Address Manager and on the network, but where the MAC address, DNS host name information, VLAN information or connected switch port does not match.
- Reclaimable—(IPv4 only) an address that exists in Address Manager, but it isn't found on the physical network. This may represent a device that was turned off at the time of the discovery, or the address may no longer exist on the network.
- Unknown—an address that exists on the physical network, but that isn't in Address Manager. This likely represents an address that has been added to the network after the last discovery.
- Range—the network range that the address is located within.
- MAC address—the MAC address of the IP address.
- Domain—the fully qualified domain name of the discovered IP address.
- Time since first detection—the time since the address was first discovered by the IP reconciliation policy.
- Overridden—shows if the address is exempt from the reconciliation process. No shows that the IP address isn't added to the override list; Yes shows that it's added to the override list. Overridden addresses aren't affected by the Reconcile all and Reconcile functions.
- Reconciliation policy—the IPv4 reconciliation policy used to discover the IPv4 addresses.
- Address state—the address state of the discovered IP address, indicating how the address is allocated.
- First detection time—the date and time the IP address was first detected by the discovery process.
- Last detection time—the date and time the IP address was most recently detected by the discovery process.
- Router port information—the IP address and port for the router on which the discovered IP address was found. If available, the name of the router is also included.
- State—the reconciliation state of the discovered IP address, indicating whether the address is reconcilable.
- Switch port information—when layer 2 discovery is enabled, the IP address, name, interface name, interface description, interface speed for the switch on which the discovered IP address was found.
- VLAN information—when layer 2 discovery is enabled, the VLAN ID and VLAN name for the switch on which the discovered IP address was found.
Note: Columns for additional fields can be added using the column select widget. For more
information, refer to Customizing tables.
Note: Table data can be filtered by field values using the filter widget. For more information,
refer to Table filtering.