SNMP Traps with Anycast - BlueCat Address Manager - 9.1.0

Address Manager Administration Guide

prodname
BlueCat Address Manager
version_custom
9.1.0

How to enable SNMP Traps with Anycast.

Use SNMP Trap service with Anycast BGP, OSPF, or RIP. First configure your Anycast environment, then configure SNMP Trap monitoring using servers for the respective Anycast service.

To enable SNMP Trap service with Anycast:

  1. Enable Anycast service and configure either BGP, OSPF, or RIP:
  2. Configure SNMP Trap Settings. For details on configuring SNMP Traps, refer to Enabling SNMP Trap Service on DNS/DHCP Servers.
Upon upgrade to Address Manager v9.1.0, customers might not be able to obtain SNMP Traps with Anycast BGP. To resolve this issue, click Update from the SNMP Service Configuration page in the Address Manager user interface (DNS/DHCP Server > Service Configuration > SNMP). For more information, refer to Knowledge Base article 06686 on BlueCat Customer Care.
Attention: SNMP Trap service with Anycast might result in accumulation of the following log message:
  • snmp[warning]: Warning: Failed to connect to the agentx master agent ([NIL])

These messages are innocuous and create no impact on service.

Attention: SNMP Traps are not sent with BGPv6 (Anycast BGP over IPv6). This is a result of a third-party limitation. For more information, refer to Knowledge Base article 06685 on BlueCat Customer Care.