Setting the iDRAC web access password - BlueCat Integrity - 26.1.0

Address Manager Administration Guide
ft:locale
en-US
Product name
BlueCat Integrity
Version
26.1.0

This section details how to set the iDRAC web access password for remote connectivity.

Set the iDRAC web access password in the iDRAC Configuration Utility. You should change the default password before connecting to iDRAC remotely. For more information on the default login credentials, refer to BlueCat default login credentials (you must be authenticated to view this topic).

Tip: After you have logged in to iDRAC with the default username (root), you can create individual iDRAC user accounts, and then assign privileges to the users.
  1. If you aren't in the iDRAC Configuration Utility, restart the appliance, then press F2 when prompted. The BlueCat System Setup menu opens.
  2. From the System Setup Main Menu, select iDRAC Settings and press ENTER. The iDRAC Settings menu opens.
  3. Press the Down arrow key to select User Configuration and press ENTER. The User Configuration menu opens.
    Make sure the Account User Name is root.
    iDRAC Settings > User Configuration             1.50.50.21
iDRAC Firmware Version                                    1.55.55
User ID                                                   2
Enable User                                               <Enabled>
User Name                                                 [root ]
LAN User Privilege                                        <Administrator>
Serial Port User Privilege                                <Administrator>
Change Password                                          [******]
  4. Press the Down arrow key to highlight Change Password and press ENTER. The Create New Password dialog window opens.
  5. Type the new password and press ENTER. The Confirm New Password dialog window opens.
    Note: The web access password is case-sensitive.
  6. Retype the new password and press ENTER.
  7. Press Esc to return to the iDRAC Settings menu.
  8. If you don't want to configure any other settings, press Esc again. A dialog window opens. 
    Settings have been changed. Do you want to
save the changes?
                 Yes No
  9. Select Yes and press ENTER.