You can change the configuration mode for the security world from the expanded details section for the HSM configuration on the HSM configuration information page.
To update the security world configuration:
- Select the Settings tab in the sidebar, then select HSM settings under DNS settings.
- Select the HSM configuration name menu, then select View details.
- Select the Update security world configuration button in the expanded details section.
-
Under Configure mode, select one of the following
configuration methods:
- Use RFS—select if you will configure the security world using
a Remote File System. If selected, the RFS address and RFS
port fields are displayed.
- RFS address—enter the IPv4 address of the Remote File System.
- RFS port—enter the port number of the RFS (by default, 9004).
- Upload security world file—select to configure the security
world using security world files in a compressed folder on your local
workstation.Note: The security world files must be copied to your local workstation from the RFS. If you won't be using the RFS to configure the security world, uploading the security world files is mandatory. For details, refer to OPTIONAL: Copying Security World files.
- Use RFS—select if you will configure the security world using
a Remote File System. If selected, the RFS address and RFS
port fields are displayed.
- In the Change control section, add comments if required.
- Select Configure.
Once configured, the Security world configuration section displays details of
your mode of configuration.