Enabling Dedicated Management on BlueCat AWS Virtual Appliances - BlueCat Address Manager - 9.3.0

BlueCat AWS Virtual Appliances

prodname
BlueCat Address Manager
version_custom
9.3.0

To enable and use the Dedicated Management interface on BlueCat AWS Virtual Appliances, you must have two interfaces (Service and Management) already configured on your instance.

BlueCat AWS Virtual Appliances virtual appliances already in production must be removed from Address Manager control before enabling Dedicated Management.

To remove BlueCat AWS Virtual Appliances from BAM control:
  1. From the BAM user interface, disable the server: Servers > server-name > Disable.
  2. From the BlueCat AWS Virtual Appliances Administration Console, remove the server from BAM control:
    Adonis> configure system
    Adonis:configure:system>set state no-proteus-control

To enable Dedicated Management:

Note: Enabling Dedicated Management creates a static route using the IP address of the SSH client which is required to connect to the management interface.
  1. Connect to your instance as the admin user via an SSH connection to the Service interface.
    ssh -i <key_pair_file_name> admin@<service_interface_ip>
  2. From Main Session mode, run the following commands to enable Dedicated Management:
    Adonis> configure interfaces
    Adonis:configure:interfaces> set dedicated-management enable
    CAUTION:
    Enabling Dedicated Management will disconnect your SSH connectivity to the Service interface. Once you enable Dedicated Management, you must re-establish the SSH connection to the Management interface.

If you need to remove your BlueCat AWS Virtual Appliances from BAM control prior to enabling Dedicated Management, replace the server in Address Manager to resume BAM control and management of the appliance (Servers > server-name > Replace).