Creating a new Virtual Network - BlueCat Address Manager - 8.3.2

BlueCat Azure Virtual Appliances

prodname
BlueCat Address Manager
version_custom
8.3.2

Add a new Virtual Network and create new subnets.

To create a new Virtual Network:

  1. Click Virtual Network then click Create new.
  2. In the Name field, enter the name of your new virtual network.
  3. In the Address space field, enter the IPv4 address for your network along with its size in CIDR format. For example, 192.0.2.0.0/16.
  4. Click Subnets and configure the following:
    1. Service subnet name—enter a name for the new subnet of the Service interface (eth0).
    2. Service Subnet address prefix—enter the subnet and size in CIDR format, for example 192.0.2.0/24.
    3. Management subnet name—enter a name for the new subnet of the Dedicated Management interface.
    4. Management subnet address prefix—enter the subnet and size in CIDR format, for example 192.1.0.0/24.
    5. Click OK.
  5. OPTIONAL: Set a public IP address to access the BlueCat Azure VM from outside the Virtual Network. In the Public IP address field select an existing public IP address, create a new one, or click None to not use a public IP.
  6. OPTIONAL: In the Service Interface Private IP field, enter an IPv4 address in the Service subnet. If left blank, an IP will be automatically selected from the service subnet.
  7. OPTIONAL: In the Dedicated Management Interface Private IP, enter an IPv4 address in the Management subnet. If left blank, an IP will be automatically selected from the dedicated management subnet.
  8. Click OK.