Creating a new Virtual Network - BlueCat Integrity - 9.4.0

Add a new Virtual Network and create new subnets.

1. Click Virtual Network, then click Create new.
2. In the Name field, enter the name of your new Virtual Network.
3. In the Address space field, enter the IPv4 address for your network along with its size in CIDR format. For example, 192.0.2.0.0/16.
4. Click Subnets and configure the following:
   1. Service subnet name—enter a name for the new subnet of the Service interface (eth0).
   2. Service Subnet address prefix—enter the subnet and size in CIDR format, for example 192.0.2.0/24.
   3. Management subnet name—enter a name for the new subnet of the Dedicated Management interface.
   4. Management subnet address prefix—enter the subnet and size in CIDR format, for example 192.1.0.0/24.
   5. Click OK.
5. OPTIONAL: Set a public IP address to access BlueCat Azure Virtual Appliances from outside the Virtual Network. In the Public IP address field select an existing public IP address, create a new one, or click None to not use a public IP.
6. Click Next: Review + create.