The following section displays example content from an FRRouting configuration file that is configured for OSPF anycast service. For more information on configuring FRRouting, refer to http://docs.frrouting.org/en/latest/setup.html.
Ensure that the Anycast VIPs are also added to the Anycast VIPs field
when configuring Anycast service through the UI or added to the ipAddresses
parameter when configuring Anycast service through the API.
log stdout debug
#
hostname zebra-test
password abc123
enable password abc123
#
interface eth0
ip address 10.10.10.1/24
interface lo:1
ip address 192.168.0.99/32
#
# OSPF config
interface lo:1
ip ospf priority 1
ip ospf hello-interval 10
ip ospf dead-interval 40
router ospf
ospf router-id 10.10.10.1
log-adjacency-changes
router-info area
network 10.10.10.0/24 area 1
network 192.168.0.99/32 area 0
redistribute connected
distribute-list ANYCAST out connected
access-list ANYCAST permit 192.168.0.99/32