The Cisco SD-WAN tab provides integration to Cisco vManage. In Cisco SDWAN environments, LiveNX will poll vManage for SDWAN alerts, configuration and tunnel statistics.
To integrate LiveNX to vManage enter the vManage hostname or IP address, set the username and password, and click Save.
If required, and a proxy is required to connect to vManage, click Add HTTP Header and enter the Key and Value. When finished, click Submit.
Once LiveNX has established a connection with vManage, the Status shows as Connected.
LiveNX can import cEdge and vEdge router inventory from vManage.
To begin this process, click Discover.
Enter the IP address(es) of interest in the Specify IP Ranges field to define the IP range of SD-WAN devices LiveNX will discover from vManage. These device’s management IPs must have connectivity to LiveNX.
LiveNX Sites and vManage Sites are defined differently. To ensure vManage sites are accurately mapped to LiveNX sites, click Set Mapping.
The Cisco SD-WAN Site Mapping modal appears.
To add an individual site, click Add.
Enter the SD-WAN Site ID and LiveNX Site Name and click Add.
Repeat for all SD-WAN Site ID’s and LiveNX Site Names to be added into the system.
When done, the site mapping is listed.
If desired, sites can also be added via CSV file. Click Import CSV File to import a CSV.
Below is an example CSV.
If there are any invalid entries in the .csv file, the rows will be ignored.
When ready, click Save & Next.
The SNMP Settings tab appears. Select the desired SNMP credentials for LiveNX to monitor these SDWAN devices.
When ready, click Save & Next.
The Node tab appears. From the Specify Node picker, select the LiveNX Node that will monitor these SDWAN devices.
When ready, click Discover.
The Device Management page appears and displays the discovery progress log.
The devices discovered from vManage appears on the LiveNX Discovered Devices tab.
Adding these discovered devices to the LiveNX inventory is now identical to device discovery of any other SNMP monitored device.
If desired, select the devices and click Edit to set or override the device site name, group and polling settings.
If desired, click Select Interfaces to define which interfaces LiveNX should monitor on these SDWAN devices. Or, to use the default learned settings, click Add All Devices.