LiveNX Flow
LiveNX Flow provides advanced end-to-end system-level flow visualizations for multi-vendor networks. The following devices have gone through flow-analysis testing with LiveNX.
|
Adtran NetVanta Series Routers |
F5 BIG-IP Application Delivery Controller Platforms |
|
Alcatel-Lucent Routers |
Gigamon GigaSMART |
|
Brocade Series Routers |
Hewlett-Packard Enterprise Procurve Series Switches |
|
Cisco Series Routers (ISR Series, CRS-1, ASR 1000 & ASR 9000 Series Routers, ENCS5000) |
Ixia’s Network Visibility Solution |
|
Cisco Catalyst Switches |
Juniper MX Series Routers |
|
Cisco Nexus Switches (Nexus 3000, 7000 & 9000 Series) |
nTop nProbe |
|
Cisco ASA 5500 Series Firewalls |
Palo Alto Networks Firewalls |
|
Cisco AnyConnect Network Visibility Module on Windows and macOS X Platforms |
Riverbed SteelHead WAN Optimization Controllers |
|
Cisco DNA Center, Cisco APIC-EM Cisco Meraki MX |
Silver Peak WAN Optimization Controllers |
|
Cisco NetFlow Generation Appliance |
Cisco vEdge/cEdge Routers Cisco Viptela VManage API |
|
Extreme Network Switches |
Endpoint Agent |
LiveNX IP SLA
Cisco Series Routers: 800, 1000, 1700, 1800, 1900, 2600,2600XM, 2800, 2900, 3600, 3700, 3800, 3900, 4300, 4400, 7200, 7600, ASR1000, CSR 1000V are supported.
LiveNX LAN
Cisco Catalyst Series Switches: 2960, 2960-X, 3560, 3650, 3750, 3850, 4500, 6500, 9000 are supported.
LiveNX Routing
Cisco Series Routers: 800, 1700, 1800, 1900, 2600, 2600XM, 2800, 2900, 3600, 3700, 3800, 3900, 4300, 4400, 7200, 7600, ASR1000, CSR 1000V, ENCS are supported.
LiveNX QoS Monitor
LiveNX QoS Monitor provides quality of service monitoring and troubleshooting for Cisco router and switches.
- Cisco Series Routers: 800, 1000, 1700, 1800, 1900, 2600, 2600XM, 2800, 2900, 3600, 3700, 3800, 3900, 4300, 4400, 7200, 7600, ASR1000, CSR 1000V
- Cisco ASR 1000 and 9000
Recommend IOS versions 12.3 or higher or 15.0 or higher for use with the software (IOS XE 2.6.0 or higher for ASR 1000 series). Earlier IOS versions may also work but are not officially supported. General-release IOS versions are recommended, although early- and limited- release versions will also work with LiveNX.
- Cisco Catalyst Series Switches: 3650, 3850, 4500-X and 9000 Limited LiveNX QoS Monitor support on Layer 3- routable interfaces and VLANs depending upon Cisco hardware capabilities.
- Cisco 5000 Series Enterprise Network Compute System
- Cisco Nexus Series Switches: 7000
LiveNX QoS Configure
LiveNX QoS Configure provides for configuring and troubleshooting Quality of Service for Cisco routers and switches.
- Cisco Series Routers: 800, 1000, 1700, 1800, 1900, 2600, 2600XM, 2800, 2900, 3600, 3700,
3800, 3900, 4300, 4400, 7200, 7600, ASR1000, CSR 1000V
Recommend IOS versions 12.3 or higher or 15.0 or higher for use with the software (IOS XE 2.6.0 or higher for ASR 1000 series). Earlier IOS versions may also work but are not officially supported. General-release IOS versions are recommended, although early- and limited-release versions will also work with LiveNX.
- Cisco Catalyst Series Switches: 9000
- Cisco Catalyst Series Switches: 3850 & 4500-X
Limited LiveNX QoS Monitor support on Layer 3-routable interfaces and VLANs depending upon Cisco hardware capabilities.
- Cisco Nexus Series Switches: 7000 Series are partially supported