Update the Address Manager and DNS/DHCP Server license.
Note: License configuration is not supported for DNS/DHCP Server appliances in
Micetro-mode.
Ensure that the license client ID is 15-characters long. The
activation key contains five sets of five alpha-numeric characters
<XXXXX-XXXXX-XXXXX-XXXXX-XXXXX>.You can update the license using either the configure interactively command or the configure clientID command. BlueCat recommends using the update interactively command.
- From Main Session mode, type configure license and press ENTER.
-
Perform one of the followings:
- If updating by using update interactively command, type update interactively and press ENTER.
- If updating by using update clientID, type update clientID <XXXXXXXXXXXXXXX> key <XXXXX-XXXXX-XXXXX-XXXXX-XXXXX> and press ENTER. If the key is valid, go to step 6. If you receive an error, check the key and try again.
- At the activation key prompt, type Y.
- Enter the client ID. If the key is valid, go to step 5. If you receive an error, check the key and try again.
- Enter the activation key. If the key is valid, go to step 6. If you receive an error, check the key and try again.
- Press any key to continue. The client ID and activation key are saved. You are returned to the license configuration mode prompt.