Adding SNMP profiles - User Guide - Micetro - 25.2.0

Micetro Admin Guide
ft:locale
en-US
Product name
Micetro
Version
25.2.0

Before a router can be queried, it must be placed in an SNMP profile containing the parameters necessary to access the SNMP information on the router.

Note: Multiple routers can share the same SNMP profile.

To add an SNMP profile:

  1. Navigate to Admin > Configuration > SNMP profiles.
  2. Select Add profile on the task bar.
  3. In the dialog, enter the required information to access the router using SNMP. The information is different depending on the SNMP version selected:

    • Profile name: Enter a name for the SNMP profile.
    • SNMP version: Select the SNMP version to use. Micetro supports SNMP versions v1, v2c, and v3.
    • SNMP port: You can specify a non-standard port to use for SNMP.
    • Community: (SNMP v1 and v2c) Enter the SNMP community string (password) to use to access the routers using the profile.
    • Username: (SNMP v3) Enter a username for accessing the routers using the profile.
    • Authentication
      • Protocol: (SNMP v3) Select the authentication protocol to use. The available protocols are MD5 and SHA.
      • Password: (SNMP v3) Enter the authentication password for the routers using the profile.
    • Encryption
      • Protocol (SNMP v3) Select the encryption protocol to use. The available protocols are AES and DES.
      • Password (SNMP v3) Enter the encryption password for the routers using the profile.
  4. If needed, disable IP Address & subnet discovery by unchecking the checkboxes.
  5. Select Next.
  6. In the Router IP addresses field, paste or enter the IPv4 address of the router(s) you want to query using this profile.
    Note: Each router’s IP address needs to be on a separate line in the text field.
  7. Select Add profile to save the settings and add the profile.