Address Manager polled objects - BlueCat Integrity - 9.3.0

Address Manager Administration Guide

Locale
English
Product name
BlueCat Integrity
Version
9.3.0

Lists the Address Manager-specific SNMP polled objects.

The following table lists the Address Manager-specific SNMP polled objects in the file BAM-SNMP-MIB.txt.

Each Address Manager MIB OID (object identifier) begins with the following prefix:

.1.3.6.1.4.1.13315 (iso.org.dod.internet.private.enterprise.bluecatnetworks)

All Address Manager object IDs begin with the same prefix, but it's omitted from the OID column below.

Attention: The following SNMP objects have been deprecated and are no longer in use:
  • .walFilesTotalSize (.100.210.1.8.1.0)
  • .replicationWarningThreshold (.100.210.1.8.4.0)
  • .replicationBreakThreshold (.10.210.1.8.5.0)
SNMP Object OID Access Description
.app .100.210.1   Address Manager application objects container
.common .100.210.1.1   Address Manager common application objects container
.version .100.210.1.1.1.0 Read-only Version of Address Manager
.startTime .100.210.1.1.2.0 Read-only Address Manager application start-up date and time
.notificationMessage .100.210.1.1.3.0 Read-only Trap-specific notification message
.database .100.210.1.2   Address Manager database objects container
.maxPoolSize .100.210.1.2.1.0 Read-only Maximum number of database connections maintained at any given time
.numConnections .100.210.1.2.2.0 Read-only Number of database connections currently in use
.deployer .100.210.1.3   Address Manager deployer objects container
.serverCountInQueue .100.210.1.3.1.0 Read-only Number of servers that have deployments currently queued
.executingServerCount .100.210.1.3.2.0 Read-only Number of servers that have active deployments
.numberOfTasks .100.210.1.3.3.0 Read-only Number of deployer tasks
.eventNotification .100.210.1.4   Address Manager event notification objects container
.queueCount .100.210.1.4.1.0 Read-only Number of event notifications currently queued
.reconciliation .100.210.1.5   Address Manager reconciliation objects container
.poolSize .100.210.1.5.1.0 Read-only Pool size of the reconciliation service
.scheduledDeployer .100.210.1.6   Address Manager scheduled deployer objects container
.numOfTimers .100.210.1.6.1.0 Read-only Total number of defined scheduled deployment tasks
.running .100.210.1.6.2.0 Read-only Defines whether the deployment scheduler is running
.scheduledTaskService .100.210.1.7   Address Manager scheduled task service objects container
.queueSize .100.210.1.7.1.0 Read-only Number of currently scheduled report tasks
.replication .100.210.1.8   Address Manager replication objects container
.walFilesTotalSize .100.210.1.8.1.0 Read-only
Attention: This OID has been deprecated. The following value is returned by this OID: No Such Instance currently exists at this OID
.replicationNodeStatus .100.210.1.8.2.0 Read-only The replication status of the server. The status values are as follows:
  • 0 - Standalone server
  • 1 - Primary server
  • 2 - Standby server
  • 3 - Removed Standby
.replicationAverageLatency .100.210.1.8.3.0 Read-only Average WAL record synchronization latency between the Primary and Standby server (in seconds). When the Address Manager server is a Standby or Standalone server, the value returned is 0. When database replication isn't running, the value returned is -1.

For more information on database replication latency, refer to Monitoring database replication latency.

.replicationWarningThreshold .100.210.1.8.4.0 Read-only
Attention: This OID has been deprecated and replaced by the .replicationLatency WarningThreshold OID. The following value is returned by this OID: No Such Instance currently exists at this OID
.replicationBreakThreshold .100.210.1.8.5.0 Read-only
Attention: This OID has been deprecated and replaced by the .replicationLatency CriticalThreshold OID. The following value is returned by this OID: No Such Instance currently exists at this OID
.replicationLatencyWarningThreshold .100.210.1.8.6.0 Read-only Warning threshold of the replication stream (in seconds), available only from the Primary server when database replication is configured. When the Address Manager server is a Standby, Removed Standby, or Standalone server, the following value is returned by this OID: No Such Instance currently exists at this OID
.replicationLatencyCriticalThreshold .100.210.1.8.7.0 Read-only Critical threshold of the replication stream (in seconds), available only from the Primary server when database replication is configured. When the Address Manager server is a Standby, Removed Standby, or Standalone server, the following value is returned by this OID: No Such Instance currently exists at this OID
.replicationStatusTable .100.210.1.8.8   Information about servers in replication. The object returns a table that contains a list of Standby servers with their associated hostname, IPv4 address, the current latency (in seconds), the replication health, and the replication role.
.replicationStatusEntry .100.210.1.8.8.1 Not-accessible Information about replicating servers entry container.
.hostname .100.210.1.8.8.1.1 Read-only Hostname of the servers in replication.
.ipv4Address .100.210.1.8.8.1.2 Not-accessible IPv4 address of the servers in replication.
.currentLatency .100.210.1.8.8.1.3 Read-only Current latency (in seconds) of the Standby servers in replication. If the value is -1, the replication latency is pending.
.replicationHealth .100.210.1.8.8.1.4 Read-only Streaming replication health of the Standby servers. The values are as follows:
  • 0 - Not replicating
  • 1 - Initializing
  • 2 - Replicating
Note: The Initializing state indicates that the database of the server is initializing.
.replicationRole .100.210.1.8.8.1.5 Read-only Role of the server in replication. The roles are as follows:
  • Primary
  • Standby
.notification .100.210.1.9   Address Manager notification objects container
.messagesReceived .100.210.1.9.1.0 Read-only Number of notification messages received
.messagesAccepted .100.210.1.9.2.0 Read-only Number of notification messages accepted
.ackSent .100.210.1.9.3.0 Read-only Number of notification messages acknowledged
.messagesProcessed .100.210.1.9.4.0 Read-only Number of notification messages processed
.backlogSize .100.210.1.9.5   Notification backlog size container
.NotificationDistributionTable .100.210.1.9.5.1   Information about the notification backlog size. The objects returns a table that contains notifications in the backlog including the count, the IP address of the source DNS/DHCP Server, the type of notification, the category of the notification, and the state of the notification.
.distributionTableEntry .100.210.1.9.5.1.1 Not-accessible Information about notification entry container
Attention: The SNMP service must be configured to use SNMP version v2c or v3 to receive information from this OID.
.count .100.210.1.9.5.1.1.1 Read-only Number of notifications
Attention: The SNMP service must be configured to use SNMP version v2c or v3 to receive information from this OID.
.bddsServerID .100.210.1.9.5.1.1.2 Not-accessible Server ID of the source DNS/DHCP Server
Attention: The SNMP service must be configured to use SNMP version v2c or v3 to receive information from this OID.
.serviceType .100.210.1.9.5.1.1.3 Not-accessible Type of notification. The type can be one of the following:
  • DNS
  • DHCP
Attention: The SNMP service must be configured to use SNMP version v2c or v3 to receive information from this OID.
.serviceAction .100.210.1.9.5.1.1.4 Not-accessible Category of the notification type. The category can be the following based on the notification type:
DNS
  • add
  • remove
  • update
DHCP
  • active
  • free
  • backup
  • expired
  • abandoned
Attention: The SNMP service must be configured to use SNMP version v2c or v3 to receive information from this OID.
.state .100.210.1.9.5.1.1.5 Not-accessible State of the notification. The state can be one of the following:
  • received
  • succeeded
  • failed
  • discarded
Attention: The SNMP service must be configured to use SNMP version v2c or v3 to receive information from this OID.
.fileSystemFootprint .100.210.1.9.5.2.0 Read-only Total size of the notification backlog (in kilobytes)
Attention: The SNMP service must be configured to use SNMP version v2c or v3 to receive information from this OID.
.notificationServiceStartTime .100.210.1.9.6.0 Read-only Start time of the notification service
Attention: The SNMP service must be configured to use SNMP version v2c or v3 to receive information from this OID.
.dbBackup .100.210.1.10   Address Manager database backup object container
.lastSuccessfulBackupTime .100.210.1.10.1.0 Read-only Date and time of the last successful local database backup
.lastSuccessfulRemoteBackupTime .100.210.1.10.2.0 Read-only Date and time of the last successful remote database backup
.JVM .100.210.3   JVM objects container
.freeMemory .100.210.3.1.0 Read-only Total amount of free memory in the Java Virtual Machine (in kilobytes)
.maxMemory .100.210.3.2.0 Read-only Maximum amount of free memory in the Java Virtual Machine (in kilobytes)
.gcTime .100.210.3.3.0 Read-only Time taken to complete the last garbage collection operation (in seconds)
.usageThresholdExceeded .100.210.3.4.0 Read-only Defines whether the Java Virtual Machine virtual memory limit has been exceeded
.activeThreadCount .100.210.3.5.0 Read-only Number of currently active Java threads
.traps .100.210.255   Address Manager trap objects container
.bamMsgTrap .100.210.255.1.0   Generic trap sent from Address Manager