Adding a static IPv4 address using the Quick Action widget - BlueCat Integrity - 9.4.0

Address Manager Administration Guide

Locale
English
Product name
BlueCat Integrity
Version
9.4.0

The Add Static IPv4 Address widget allows you to quickly add IP addresses to a specific network. You can configure a widget for each network to which you will be adding IPv4 address.

To add a static IPv4 address:

  1. From the Quick Actions widget that has the appropriate configuration and view configured, click Add Static IPv4 address.
  2. In the Network field, type or choose the network to which you want to add an IP address.
  3. In the IP address field, type or choose the IP address. The menu will display the next ten available addresses. IP addresses which are part of a pending workflow request aren't displayed.
  4. In the Zone field, type or choose the zone to which the IPv4 address belongs.
  5. In the Host Name field, type the host name you want to add.
  6. In the Mac Address field, enter the MAC address of the device to which the IPv4 address belongs.
  7. In the Name (Description) field, enter the name of the device to which the IPv4 address belongs.
  8. If there are any mandatory user-defined fields (UDFs), fill in the required information.
  9. Under Change Control, add comments, if required.
  10. Click Add to save and add the IP address to the network. Click Cancel to exit the Quick Action.