Removing VLAN interfaces - BlueCat Integrity - 9.4.0

Address Manager Administration Guide

Locale
English
Product name
BlueCat Integrity
Version
9.4.0

Remove a VLAN interface tagged to a parent interface. Removing all VLAN interfaces disables VLAN Tagging.

Note: You can't remove a parent interface that's tagged with one or more sub-interfaces (such as VLAN or bond). Remove all sub-interfaces before attempting to remove a parent interface.
Note: VLAN customers might require the Primary Service IP on a VLAN interface, and as such will need to remove the default IPv4 address on eth0. For more information, refer to Removing the factory default address from eth0/bond0.

To remove a VLAN interface:

  1. From Main Session mode, type configure interfaces and press ENTER.
  2. Type remove <vlan-interface> and press ENTER.
  3. At the prompt, type <Y\y> and press ENTER.
The Administration Console immediately deletes the VLAN interface.
Note: Manually restart DHCP service after adding VLAN interfaces

Currently, a known issue exists whereby DHCP service won't listen on any newly added VLAN interfaces. As a workaround, you must manually restart DHCP service from the Address Manager user interface. For details, refer to Starting, stopping, and restarting DHCP service.

For more information on this issue, refer to article 15300 on BlueCat Customer Care.